Results 1 to 4 of 4
  1. #1

    Console Commands for bf3

    Access the console by pressing the ` key (unless you have it set up differently)

    Demo Commands

    demo.recordDemo [demoname] - Starts recording current gameplay and saves the file as demoname.bf2demo in your \Program Files\EA Games\Battlefield 2 Demo\mods\bf2\Demos\

    demo.stopRecording - Stops current demo recording

    demo.ShutdownDemo -

    Game Commands

    game.sayAll [string] - Says the specified text in global chat

    game.sayTeam [number] [string] - Says the specified text in team chat

    game.lockFps [framerate] - Caps the game's maximum framerate to specified number

    game.allowToggleFullscreen [0,1] - If set to 1 allows toggling of fullscreen/windowed mode

    game.toggleFullscreen - Toggles between fullscreen and windowed mode

    Localprofile Commands

    localProfile.setName [name] - Sets the name for your current account

    localProfile.setNick [nick] - Sets the nickname for your current account

    localProfile.setGamespyNick [GameSpyNick] - Sets the GameSpy login name for your account

    localProfile.setEmail [email account] - Sets the email account for the current account

    localProfile.setPassword [password] - Sets the password for the current account

    localProfile.setNumTimesLoggedIn [number] - Sets the number of times the player has logged in with the current account

    localProfile.setTotalPlayedTime [seconds] - Sets the time the game has been played using the current account -

    localProfile.addDemoBookmark [ ] -

    Globalsettings Commands

    globalSettings.setDefaultUser [number] - Sets the profile to use, the first one being 0001, then 0002 etc.

    Renderer Commands

    renderer.drawHud [0,1] - Turns the Heads Up Display (HUD) on or off.

    renderer.drawConsole [0,1] - Turns off access to the in-game console if set to 0.

    renderer.drawFps [0,1] - Displays the current and average frames per second (FPS) in the top left corner.

    Sv Commands

    sv.allowNATNegotiation [0,1] -

    sv.interface -

    sv.timeBeforeRestarting [0,1] -

    sv.autoBalanceTeam [0,1] -

    sv.teamRatioPercent [0,1] -

    sv.autoRecord [0,1] -

    sv.demoIndexURL [address] -

    sv.demoDownloadURL [address] -

    sv.autoDemoHook -

    sv.demoQuality -

    sv.adminScript -

    sv.sponsorText -

    sv.sponsorLogoURL [address] -

    sv.communityLogoURL [address] -

    sv.radioSpamInterval -

    sv.radioMaxSpamFlagCount -

    sv.radioBlockedDurationTime [seconds] -

    sv.useGlobalRank [0,1] -

    sv.useGlobalUnlocks [0,1] -

    Gamelogic Commands

    gameLogic.togglePause - Toggles pausing the game.

    Settingsmanager Commands

    SettingsManager.stringSet -

    SettingsManager.boolSet -

    SettingsManager.IntSet -

    SettingsManager.floatSet -

    SettingsManager.u32Set -

    SettingsManager.stringGet -

    SettingsManager.boolGet -

    SettingsManager.intGet -

    SettingsManager.foatGet -

    SettingsManager.U32Get -

    Controlmap Commands

    These settings should be used in the Controls.con file under your \Documents and Settings\[username]\My Documents\Battlefield 2 Demo\Profiles\[profile]\ directory.

    controlMap.deleteControlMap -

    controlMap.dump -

    controlMap.setButtonRiseTime -

    controlMap.SetButtonFallTime -

    controlMap.SetDoubleTapTime -

    controlMap.addAxisToAxisMapping [string] -

    controlMap.addButtonsToAxisMapping [string] -

    controlMap.addKeyAndButtonToAxisMapping [string] -

    controlMap.addKeysToAxisMapping [string] -

    controlMap.addButtonToTriggerMapping [string] -

    controlMap.AddKeyToTriggerMapping [string] -

    controlMap.setAxisScale -

    controlMap.setYawFactor -

    controlMap.setPitchFactor -

    controlMap.addAxisToTriggerMapping -

    controlMap.InvertMouse [0,1] - Set to 1 for inverted mouse, 0 for default mouse

    controlMap.mouseSensitivity [number] - Determines the sensitivity of the mouse

    controlMap.keyboardSensitivity [number] - Deterimes the sensitivity of the keyboard

    Maplist Commands

    These commands are used to manage lists of maps by server administrators.

    mapList.list - Lists map ID numbers, map name, game mode and the number of players if specified.

    mapList.configFile [new location for file] - Used to specify the location of the _mapList.con file. Default is \My Documents\Battlefield 2 Demo\ServerConfigs\

    mapList.load - Makes the server reload _mapList.con - Saves the current map list on the server to the file _mapList.con

    mapList.mapCount - Shows the total number of maps in the current map list

    mapList.currentMap - Shows the map list ID number of the current map being played

    mapList.clear - Clears the current map list

    mapList.remove [map ID number] - Removes the specified map from the map list

    mapList.append [map name] [game mode] [number of players] - Add a new map to the end of the map list. You must specify the map name and game mode.

    mapList.insert [map ID number] [map name] [game mode] [number of players] - Same as mapList.append command, but with this command you can specify at what map ID number to insert the new map into the list.

    Inputdevices Commands

    InputDevices.setInvertAxis -

    InputDevices.setAxisScale -

    Admin Commands

    These commands are used by server administrators.

    admin.listPlayers - Lists the players connected to the server, showing their name, ID number and IP number.

    admin.runNextLevel - Forces the server to end the round and start the next map in the map list.

    admin.currentLevel - Shows the map list ID number for the current map being played.

    admin.nextLevel - Shows the map list ID number for the next map to be played.

    admin.restartMap - Restarts the current map.

    admin.banPlayer [player ID number] [timeout] - Enter the player ID number you want to ban. Bans the player from the server by using their IP address. The timeout value controls the length of the ban e.g. perm for permanent ban, round to ban them for the rest of the round, and 180 is 180 seconds (3 minutes).

    admin.banPlayerKey [player ID number] [timeout] - Enter the player ID you want to ban. Bans the player from the server by using their CD key hash.

    admin.addAddressToBanList [IP address] [timeout] - Enter the IP number you want to ban.

    admin.addKeyToBanList [CD key hash] [timeout] - Enter the CD key hash you want to ban.

    admin.removeAddressFromBanList [IP address] - Enter the IP address to remove from the ban list.

    admin.removeKeyFromBanList [CD key hash] - Enter the CD key hash you want to remove from the ban list.

    admin.clearBanList - Clears all ban lists.

    admin.listBannedAddresses - Displays a list of the currently banned IP addresses.

    admin.listBannedKeys - Displays a list of the currently banned CD keys.

    admin.kickPlayer [player ID number] - Enter the ID number of the player you want to kick.

    Remote Console

    These commands are used by server administrators.

    To setup remote console access to the server, onthe server create a new plain text document in \admin\ called default.cfg and enter the following text into the new file:



    Save the file, and start the server. Now you can access the server remotely by using the following commands from a client:

    rcon login [YourPassword] - Use this command to login to the server.

    rcon users - This command lists all the users connected to the server. Very similar to admin.listPlayers

    rcon exec [command name] - Replace with a console command you would like to execute on the server. For example: rcon exec admin.kickPlayer 3

    Exit - Quits the game to desktop.
    "Mira Mira on the wall who's the fairest of them all?" - Dickdastardly "it'll sting a lot" - Lesion

  2. #2
    What do I do if I can not access all of these commands in single player to mess around in the campaign?

  3. #3
    Hello Jim bot, Welcome. I'm not sure to be honest either wait for an answer on here from someone who's more knowledgeable than me or talk to EA Support on the battle log home page.
    "Mira Mira on the wall who's the fairest of them all?" - Dickdastardly "it'll sting a lot" - Lesion

  4. #4
    Quote Originally Posted by jimbot70 View Post
    What do I do if I can not access all of these commands in single player to mess around in the campaign?
    @Jimbot, single player is easy on this game, why would you mess around with the commands?
    Plus the ones posted are for console. For PC it's just a walk in the park.
    Survivor of LAN V, VI, VIII, IX, X, XII, XIV, XVI, XVIII, XX, XXIV, XXX and XXXII so far...
    Lionheart; Grolsch to DuVeL is like spinache to Popeye
    Cheesepuff...A cyborg is sent from the future on a deadly mission. He has to kill Ninja_Freak, a young Man whose life will have a great significance in years to come.Ninja has only one protector - DuVeL - also sent from the future. The Terminator uses his exceptional intelligence and strength to find Ninja_Freak & attempt to terminate him.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Next Gen Console
    By Jamoe in forum Banter
    Replies: 4
    Last Post: 11th May 2006, 09:26 AM
  2. How do I get the console down?
    By MrHeineken in forum Counter-Strike: Source
    Replies: 3
    Last Post: 25th May 2005, 08:31 PM
  3. no console
    By 0ni0n in forum Counter-Strike: Source
    Replies: 6
    Last Post: 20th November 2004, 11:18 AM
  4. Condition Zero Bot Console Commands.
    By TeaLeaf in forum Counter-Strike:Condition Zero
    Replies: 5
    Last Post: 2nd August 2004, 12:41 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts